tag:blogger.com,1999:blog-2368574284017527503.post3383407501583258463..comments2023-09-29T01:43:08.277-07:00Comments on Golden Tubes: Tube Biasing 101: (Part 1) Biasing a 6922Nazaroohttp://www.blogger.com/profile/03584331774685466296noreply@blogger.comBlogger1125tag:blogger.com,1999:blog-2368574284017527503.post-38862291416317956932014-09-24T19:00:58.155-07:002014-09-24T19:00:58.155-07:00One thing I can't figure out here---what do yo...One thing I can't figure out here---what do you mean that the cathode floats 150V above ground? In the original, the cathode was at 90V, because the plate voltage is set at 160. Here, the plate voltage is higher (~175V?) so it seems like the cathode to ground voltage should be less than the original.<br /><br />Also, if it's 150V between cathode and ground, isn't this a concern for the potential between the cathode and the heaters?<br /><br />Thanks, it's an informative piece.Anonymoushttps://www.blogger.com/profile/14368088280896813002noreply@blogger.com